Roller doors repairs are expensive. Ensuring that the garage door works smoothly should be one of the top items in the checklist while maintaining a house. Also, it is very important for the house owner to understand that preventive maintenance is the most inexpensive way of ensuring that one does not end up spending a lot of money on repairs. Some of the tips for roller doors repairs are:
Carefully Researching and Listening to Word of Mouth
The first important tip for preventive maintenance for avoiding roller doors repairs is to carefully notice the otherwise smooth functioning of the garage door every time it is used. The items that can be checked are:
- Is the door moving smoothly?
- Is it jerking in certain places?
- Does the door operate silently?
- Does the door make any kind of scraping or grinding noises?
- Are the sides of the system symmetrical?
Tightening the Hardware
One thing to remember during roller door repairs is that a door moves at least thousand times every year. Since there is a lot of friction, vibration, and movement the hardware might lob out of the position. This should be carefully examined and the repair technician can tighten every roller bolt or roller bracket that is in a socket wrench.
Testing the Balance of the Door
One of the important items in the checklist of the roller door repairs is to carefully check if the door is balanced. After the door is disconnected from the opener, the door should be manually moved half the way up. If the door doesn’t stay in the position, it means that the springs are improperly balanced. Based on the complexity involved here, it is best to leave the adjustment of garage door to the professionals.
Inspecting and Replacing the Rollers During Roller Door Repairs
During roller door repairs, the roller should be carefully inspected at least two times in a year and ideally should be replaced once in seven years. The replacement time is shortened if the garage door is used frequently. The rollers that are chipped, cracked, or worn out should be immediately replaced. This should be carried out by reinstalling and removing the roller brackets.
Weather stripping
During roller door repairs, if the technician notices that that rubber strip located close to the bottom of the door is cracked, it should be replaced as well. These weather strips can be procured from local hardware stores or home improvement stores. These strips should be cut into a specific size and then inserted into the grooves.
Lubricating the Moving Parts
Applying grease on the garage doors is a good option to ensure that the doors function smoothly. White lithium grease is a good option for the opener’s screw or chain, and a lubricant that can be sprayed and be used on the top of overhead springs.
Checking the Cables
During roller door repairs, the technician should never touch the high-tension cables that are used to lift the door. This is because these cables have enough power in them to cause grievous injuries. However, the condition of the wires can be checked. If there are broken strands or if there is damage close to the roller bracket, a professional should be hired as soon as possible.
During roller doors repairs, extra care should be taken to inform every member of the household to keep away from the garage door area. It is best that everyone stays away from operating the door till all the repairs are carried out. Above mentioned are the maintenance tips for roller doors repairs.