Home Exterior

A Guide to Select The Right Concrete Floor Coatings

Concrete is an exclusive product that results from mixing cement, sand, water and aggregates. As it solidifies into a stone-like hard slab with incredible power and toughness, therefore, is commonly used in a variety of applications.


Facility floors in garages, decks, basements, warehouses, manufacturing floors, storage rooms and other facility areas need the application of high-performance industrial concrete floor coatings to bear the pressure brought by everyday operations. Even though concrete floors can ensure the operational load for long, industrial concrete floor coatings can strengthen resistance to chemical and physical damages for much longer.

Criteria For Selection of Floor Coatings

These days with many kinds of floor coatings products available on the market, selecting the right one can be tricky. However, facility managers need to keep in mind the definite requirement of the facility, to make the choice easier. Below are some requirements that may arise for the facility, and for which a variety of industrial floor coatings can be used:

  • Revamp and safety of damaged floors
  • Quality performance of facility floors
  • Transforming boring floors into stunning surfaces
  • Cost-efficiency and practicality
  • Simplicity of installation
  • Time limitation and service uptime

The option of coating product may be based on one or a combination as per requirements. There are many products appropriate for each. From coatings, cement-based toppings, and curing materials, not to point out choices in urethane-based coats, epoxy mixes, polyurea or acrylics.

The slip-up that most people make is that they believe that they just need to go out and purchase some random type of coating slap and then everything is done. Well, that is not right. You need to put a little bit more consideration than just throwing things into your shopping cart, returning home and coating the floor. You need to confirm that you are going to take something that works with your objective instead of just something that will “do the job” an average type.

Guidelines While Choosing The Right Concrete Floor Coatings:

  • Get a working knowledge of the properties of concrete floorings
  • Surface assessment and repair
  • Know the vulnerabilities of concrete floorings
  • Evaluate location and usage
  • Categorise priorities and concerns
  • When in doubt, rely on the expert
  • Be familiar with the coating application process
  • Pick the best-fitted coatings

Applying A Concrete Floor Epoxy Coatings

Applying concrete floor coating is an easy task but may necessitate a professional call. Epoxy demands an even and a professionally cleaned surface. Prior to installing any coating to your floor, ensure that it is clean and free of any debris that may avert bonding, such as dirt, oil or sealer. Any dirt or grease will compromise the hold, so cleaning is a must step that should not be hurried.There should be no cracks and potholes and particular consideration should be paid to cover if any. Once the whole floor is done, you still have to hold off parking the car on it for another 72 hours.

It is better to avoid the inexpensive floor paints as low-cost garage and basement floor paints only look great the day they are applied. It goes downhill from there soon. Whether you apply it yourself or engage a professional, ensure that the concrete surface is correctly profiled.

Sophisticated flooring can be a delight to eyes!

Related posts

Working from Home: Your Garage Could be the Perfect Office


Choosing the right Stone Paving Materials


The Anatomy of Exposed Aggregate

Joseph Webb